Kohler K-1018 Guia De Instalacion página 5

Receptor
4. Pre-fit the Receptor in the Framing Pocket
- Assemble and install the drain according to the manufacturer's instructions.
- Move the shower receptor into the framing pocket.
- Make sure the unit is level on all sides. If the unit is not level, shim as required to level the unit.
- Predrill the side and back nail- in flanges on the stud centers around the receptor. Do not nail the receptor in place
at this time.
Kohler Co.
Check level here
Leveling blocks/shims should be
placed under the receptor if needed
Back view of receptor on subfloor
Install the receptor with
the drain fitting attached
Subfloor
5
A
1024937-2-