Kohler K-T13133 Guia De Instalacion página 4

Bath
Elbow
1/2" Nipple
7/16"
(1.1 cm)
Apply
Plumbers
Putty.
1. Install the Spout, If Used
Remove the temporary nipple.
Apply thread sealant and install a 1/2" nipple so it extends 7/16"
(1.1 cm) beyond the finished wall.
Apply a bead of plumbers putty or other sealant around the back
of the escutcheon according to the manufacturer's instructions.
Apply thread sealant to the nipple and thread the spout onto the
nipple.
Carefully tighten with a clean strap wrench.
Remove all excess putty.
1036140-2-A
Apply Thread
Sealant Tape.
Escutcheon
4
Spout
Kohler Co.