Kohler K-T13133 Guia De Instalacion página 7

Plaster Guard
Valve
w/Dome
Discard.
Backing Plate
4. Install the Plate and Diverter
Remove and discard the plaster guard and/or dome, if installed.
For installation over a tiled wall, apply a bead of silicone sealant
around the back edges of the faceplate.
Fit the backing plate over the valve so the large hole is to the
bottom and secure with two screws. Do not overtighten.
Position the gasket over the diverter stem.
Position the stem adapter over the diverter stem and tighten the
setscrew.
Slide the sleeve over the stem adapter and thread onto the
diverter threads.
Kohler Co.
Screw
Diverter
Screw
Stem
Setscrew
7
Valve Stem
Gasket
Stem
Adapter
Sleeve
1036140-2-A