Installing And Removing Flat Panel Screen - PEERLESS Mounts SF630P Instalación Y Montaje

Installing and Removing Flat Panel Screen

Hook screen onto wall plate (A) fi gure 6.1. Tighten
6
M5 x 12 mm screws (C), shown in fi gure 6.2 and
detail 1.
Note: For security models, use 4 mm security allen
wrench (I) to tighten M5 x 12 mm screws (C).
To remove screen from mount, loosen screws (C)
and lift screen off of mount.
WARNING
• Do not lift more weight than you can handle. Use ad-
ditional man power or mechanical lifting equipment
to safely handle placement of the screen.
• Failure to lock hook bracket with screws (C) can
cause screen to come off mount if hit accidentally.
CAUTION
• Do not tighten screws with excessive force.
Overtightening can cause damage to mount. Tighten
screws to 20 in. • lb (2.26 N.M.) maximum torque.
B
A
C
fi g. 6.2
7 of 23
All other brand and product names are trademarks or registered trademarks of their respective owners.
A
SCREEN
B
C
DETAIL 1
ISSUED: 04-18-05 SHEET #: 201-9427-7 04-20-10
© 2009, Peerless Industries, Inc. All rights reserved.
fi g. 6.1
A
Peerless Industries, Inc.
3215 W. North Ave.
Melrose Park, IL 60160
www.peerlessmounts.com