Best IC34 Manual De Instrucciones página 17

EXTERNAL BLOWER
PROGRAMMING MODE PROCEDURE (IC34E)
The range hood is designed to work with
several different blower models. Before using,
the control must first be programmed to your
blower model, in order to achieve proper
operating speeds.
From the chart below:
1. Find the SETUP number that corresponds
to the blower model that is installed with
your range hood.
2. The control is factory-preset to SETUP 3. If
your blower model is listed under SETUP
3, no programming is required and the
range hood is ready to use.
SETUP 1
BLOWER E B 6
MODEL ILB3
NUMBER ILB6
SETUP 2 SETUP 3
(default)
EB12 E B 9
EB15 ILB11
ILB9
3. To program blower models listed under
SETUP 1 and 2:
A) Power must be supplied to the hood.
The blower and lights must be turned
off.
B) Press and hold OFF and ON/+ for 5
seconds. The Blower LED Indicators
will flash 3 times. Then only the LED
will stay lit. After 1 second, the Blower
LED Indicators will show the current
setting as follows:
C) To select the proper SETUP:
Press OFF- or ON/+ to select the desired
SETUP.
D) Once the proper SETUP is found:
Press ON to memorize the setting, or
wait 15 seconds and the program will
automatically exit and store the SETUP.
E) The range hood is now ready to use.
- 17 -
SETUP 1
SETUP 2
SETUP 3