Wireless Lan; Wan Connection - Zyxel NBG-318S Manual Del Usuario

3.2 Wireless LAN

Configure your NBG-318S to support a wireless network by following these steps.
1 Enter a unique name to identify the NBG-318S on the wireless LAN.
2 Select a wireless channel. The NBG-318S and the wireless client must use the same
channel.
3 Select Auto to automatically use the WPA-PSK security standard, which provides a
high level of security. See your User's Guide for information on other kinds of security.
Click Next.
4 Write down the security key that displays in the pops-up screen. Wireless clients will need
this security key to access the NBG-318S. Click OK to continue.
Write down the security key, Name (SSID), Security and Channel
Selection for later use as the NBG-318S and other devices on your
wireless network must use the same settings.

3.3 WAN Connection

1 You may need to wait several minutes while the wizard attempts to detect which WAN
connection type (Ethernet, PPPoE or PPTP) you are using.
• If the wizard detects your connection type, follow the steps for your connection type as
given below.
ENGLISH
6