Display Mode - Parker SensoControl ServiceJunior SCJN-016-01 Instrucciones Para El Manejo

3.1 Display mode

The actual pressure (ACT) is indicated in the display mode. The
ACT measured value is displayed in the corresponding unit. The
MIN, MAX or FS values is indicated in the lower part of the dis-
play.
Display
Bar graph
ACT
MIN/MAX
FS
Units
Description
Graphic indication of the actual pressure.
A pressure peak is indicated by means of a pixel
(graduation mark).
The indicated value is refreshed at intervals of
50 ms (20 measurements/s).
Indicates the actual pressure.
The indicated value is refreshed at intervals of
300 ms (3 times/s).
Indicates the MIN, MAX or FS value according
to setting.
The indicated value is refreshed at intervals of
300 ms (3 times/s).
Upper limit of the scale (e.g. 400 bar).
Indicates the chosen unit.
8