Echo 99946400023 Hoja De Instrucciones página 3

3. Remove gear case assembly (C) from main pipe (D)
4. Pull upper drive shaft (E) 12 in. (305 mm) out of
housing (F).
12 in. (305 mm)
E
F
To power head
5. Loosen extension thumbscrew (G). Align ridges
on upper drive shaft housing with grooves in
extension clamp. Align upper drive shaft (E) with
extension drive shaft (H).
H
G
E
X7672300104
EN
C
D
H
6. Slide extension (I) onto housing (F) until exten-
sion stops. Tighten extension thumbscrew (G).
I
G
7. Note: Bottom view of gear case shown.
Install gear case assembly (C) (bottom view
shown) onto main pipe (I) of extension. Align lo-
cating screw (B) on bottom of gear case coupler
to locating hole (J) on main pipe (I) of the ex-
tension. Tighten locating screw (B). Tighten four
gear case coupler screws (A).
C
A
Caution Label, P/N X505006800
- 2 -
©2018 ECHO Incorporated. All Rights Reserved
F
B
K
J