Advanced Set Up Options (Isu) - Honeywell Home T2 Pro THECC11060MX Instrucciones De Instalación

Advanced set up options (ISU)

#ISU
120
125
430
431
1400
1401 (only if
ISU 1400 is
set to 1)
1410
1420
Note: Thermostat will follow an auto-calibration process the first time Low Cool
runs for 3 consecutive hours and High Cool runs for 3 consecutive hours during
normal operation. Low Cool and High Cool could run at different days or with an
OFF period between. If booth speeds runs consecutively Low Cool must be first.
Note: If the swamp cooler system is replaced it is highly recommended to reset
the thermostat into factory default values to perform a new auto-calibration
process as follows:
1 Press and hold CENTER and
advanced menu.
2 Press 2 times to go to Reset Defaults option, and press select.
3 Allow the thermostat run the auto-calibration process as previously indicated.
ISU Name
Scheduling Options
Temperature Indication
Scale
Minimum Cool Setpoint
Maximum Cool Setpoint
Continuous Backlight
Inactive Backlight Level
Clock Format
Indoor Temperature
Display Offset
buttons for approximately 3 seconds to enter
ISU options (factory default in
bold)
[0] = No schedule
[1] = All days same
[2] = |MO-FR|SA-SU|
[3] = |MO-FR|SA|SU|
[4] = Individual days (7 Days
Programmable)
[0] = Fahrenheit
[1] = Celsius
59 to 68 °F
15.0 to 20.0 °C
86 to 95 °F
30.0 to 35.0 °C
[0] = On Demand
[1] = Continuous
[0] = Off
1 to 5 levels
12 hour, 24 hour
-3 to +3° in 1 °F increments
-1.5 to +1.5° in 0.5 °C increments
Default 0°
6