Setting Functions And Options - Honeywell Home Smart Serie Guia Del Usuario

Ocultar thumbs Ver también para Smart Serie:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Setting functions and options

You can change options for a number of system functions. Available functions
depend on the type of system you have. The functions, along with available options
are described on pages 31–32.
This thermostat is pre-set for a single-stage heating/cooling system.
Setting function 1 for a heat pump will adjust the default settings.
1 Press
Fan
and
s
for approximately 3 seconds. The screen
will change to display two numbers and the
button designations will be Done, Back, blank,
Next.
2 Press
Next
until you see the function
number—the larger number on the left—you
want to set.
3 Change options for any function by pressing
or
until the correct option (smaller
s
t
number on right) is displayed.
4 Repeat Steps 2 and 3 until you have set all
functions that you wish to change.
5 When you have made all changes, press
to save and exit.
69-2715EF—07
simultaneously and hold
Done
30
HOLD
MCR33883
MCR33883
HOLD
MCR33884

Publicidad

Capítulos

Tabla de contenido
loading

Este manual también es adecuado para:

Rth6580wf1003

Tabla de contenido