Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
5
Store the Print Head Locking Rod.
• Face the blue lever portion toward you, and
then press the rod to the left and hook it.
• Place the right end on the hook.
• After placing both ends, turn the blue lever
downward to lock it.
The Print Head Locking Rod is required
during transport. Do not throw it away.
6
Attach the Handhold Cover.
Use a coin to turn the screws to fasten.
7
Next, install the ink tanks.
EN
7
Publicidad
Tabla de contenido
