Canon WG7000 Serie Guía De Inicio página 17

Configuring Fax Settings
(WG7250Z/WG7250F)
If your machine does not come with a
telephone cable, have one ready, as
necessary.
Configure the fax settings, as shown below.
1
Press <Fax>.
2
Press <Set Up Now>.
3
Register the machine's telephone number
(fax number) and abbreviated user name
(unit name).
• The information below will be printed at the
top part of the paper output from the
destination machine as sender information.
Fax Number
Number's Type
Sent Time Unit Name
02/02 2017 10:00AM FAX 123XXXXXXX CANON
For details
"Drivers" and "Configuring Initial Settings for Fax Functions" in the Online Manual
Page Number
0001
4
Set the reception mode.
Answer the questions on how you will use
the fax function to select the best settings.
5
Connect to a telephone line.
Handset
Telephone
Telephone line jack
6
Press <End>.
7
Press <OK>.
Setup complete.
Your machine is now ready to use.
EN
C
B
A
15