Removing The Splutch - Whirlpool Maytag MVW6200KW Manual Tecnico

5. To remove the belt, pull out on the belt and turn the splutch pulley until
the belt slides off.
6. Unplug the harness and remove the two (2) mounting bolts. Now you
can remove the motor.
A
A. Motor Screws
42
FOR SERVICE TECHNICIAN'S USE ONLY
A
B
B. Motor Harness (Lower)

Removing the Splutch

WARNING
Electrical Shock Hazard
Disconnect power before servicing.
Replace all parts and panels before operating.
Failure to do so can result in death or electrical shock.
WARNING
Excessive Weight Hazard
Use two or more people to move and install
washer.
Failure to do so can result in back or other injury.
1. Unplug washer or disconnect power.
2. Turn off the water supply to the washer.
3. Complete the steps 1-6 from section Removing the Drive Belt and
Motor.
4. Hold the splutch pulley and remove the mounting nut.
5. Lift off the pulley.
DO NOT REMOVE OR DESTROY