Ego Power+ SNT2400 Manual Del Operador página 15

LIST OF CONTENTS
PART NAME
Snow Blower
Snow-Discharge Chute Assembly
Handle Assembly
Operator's Manual
Chute Clean Tool
Shear Pin
TO INSTALL THE HANDLE
ASSEMBLY
NOTICE:
The handle assembly requires
assembly before operating the snow
blower (Fig.2).
1. Loosen the four locking knobs and
remove the four bolts from the rear
handle (Fig.3).
2. Lift the handle assembly, align
the holes in the side rails with the
holes in the rear handle, select
the preferred handle height, then
secure the handle assembly with
the bolts and locking knobs (Fig.4).
Please see section "HANDLE
HEIGHT ADJUSTMENT" for detailed
adjustment instructions.
56V LITHIUM-ION CORDLESS SNOW BLOWER — SNT2400/SNT2400-FC
2
Locking Knob
3
4
QUANTITY
1
1
1
1
1
2
Handle Assmbly
Rear Handle
Locking Knob
Bolt
Rear Handle
Side Rail
15