Operation - Ego Power+ SNT2400 Manual Del Operador

OPERATION

WARNING:
Remember that a careless fraction of a second is sufficient to inflict serious injury.
WARNING:
ANSI Z87.1. Failure to do so could result in objects being thrown into your eyes and
other possible serious injuries.
WARNING:
manufacturer of this product. The use of attachments or accessories not recommended
can result in serious personal injury.
APPLICATION
You may use this product for purpose listed below:
Removing snow from areas such as driveways and sidewalks.
HANDLE-HEIGHT ADJUSTMENT
The handle assembly can be set to three
different heights. Choose a comfortable
operating position according to your
height.
1. Loosen the two upper locking knobs
and pull out the two bolts (Fig.7).
Save them for reassembly.
2. Loosen the two lower locking knobs. It is not necessary to remove the two lower
locking knobs and bolts from the side rails during handle height adjustment.
3. Raise or lower the handle and select the appropriate height relative to the
positions of the holes in the rear handle.
4. Once arriving at the appropriate holes, tighten the handle with the reserved knobs
and bolts; then tighten the two lower locking knobs to secure the rear handle.
56V LITHIUM-ION CORDLESS SNOW BLOWER — SNT2400/SNT2400-FC
Do not allow familiarity with this product to make you careless.
Always wear eye protection with side shields marked to comply with
Do not use any attachments or accessories not recommended by the
7
Upper
Locking Knob
Lower
Locking Knob
17