Gunson TRAKRITE Instrucciones De Uso página 7

Gunson Trakrite Camber Gauge 2
Measures the camber and caster angle on the wheel
hub or brake disc and allows adjustment to maintain
correct wheel alignment and even tyre wear.
Introduction:
Magnetic gauge for checking camber and caster angles.
• Attaches to the hub or disc brake
• Accurate checking of castor and camber angle
• Graduated from -6 to +6 degrees
• Saves expensive repair and down time
• Allows the strut to be returned to original camber position or to check the amount of
camber change before re-installing
Calibration:
To ensure the magnetic gauge is calibrated correctly to read absolute level, use a spirit
level to level the transverse bubble and clamp the gauge onto a known vertical service
(metal is helpful).
Adjust the knob at the rear to centre the bubble on the Zero position.
N.B. Any adjustments made to camber or caster angle may affect the other so always re-
check a final time.
Gunson Trakrite Camber Gauge 3
Magnetic