Gunson TRAKRITE Instrucciones De Uso página 9

Also available in the Trakrite range:
Gunson Trakrite Wheel Alignment
Gauge (Part Number G4008)
The Trakrite wheel alignment gauge is
the simplest, most accurate device for
checking the alignment of the steered
wheels of car and light commercials. It
is a roller bearing platform over which
one front wheel is slowly driven with the
wheels in their straight ahead position.
Gunson Trakrite Camber, Castor and King Pin
Gauge (Part Number 77099)
Camber gauge with fixed graduation from +5
degrees to -5 degrees, castor gauge graduated from
+11 degrees to -3 degrees and King Pin gauge from
0 to 14 degrees left to right.
Gunson Trakrite Camber Bar
(Part Number 77137)
Designed to allow the
Gunson 77066 Trakrite Camber
Gauge or the Gunson 77099 Trakrite
Magnetic Camber Castor & King Pin Gauge, to be
used with the wheels on the vehicle and the vehicle
sitting on the ground.
Also available from
Gunson:
Gunson Steering Turntables
(Part Number 77100)
Competitively priced pair of turntables
for checking the tracking on modern
vehicles. Use in conjunction with
Gunson 77099 Trakrite camber, castor
and King Pin gauge.
Gunson Trakrite Camber Gauge 6 Gunson Trakrite Camber Gauge 7