Component List; Technical Data - Worx MAKER X WX742L Manual De Instrucciones

COMPONENT LIST

1. FEEDING CUP
2. FEEDING CUP COVER
3. DUAL FUNCTION TRIGGER
4. TAIL ADJUST SCREW
5. POWER CORD CONNECTION
6. COMPRESSOR
7. NOZZLE
Not all the accessories illustrated or described are included in standard
delivery.

TECHNICAL DATA

Rated voltage
EN
Pressure value
6 Nozzle size
Machine weight
* X may be followed by one or two characters. All models are the same except model
number and trademark. The suffix in models may be number from "1" to "99" or English
letter "A" to "Z" or ''M1'' to ''M9'' which means different package or the various of acces-
sories packed in the package.
** Voltage measured without workload. Initial battery voltage reaches maximum of 20
volts. Nominal voltage is 18 volts.
Category
20V Hub/HubX
Only use the appropriate accessories intended for this tool. Accessory information can
be found on the product packaging, at a Worx dealer or on our website at www.worx.com.
MakerX series tools and 20V Hub/HubX are specially designed to work together, so do
not attempt to use any other devices.
Model
WA7150
WA7151
WX742L WX742L.X *
14-18 PSI (0.10 -0.12 MPa)
Capacity
Input: 20 V 10 A Max.
Output: 20 V 10 A Max.
Input: 20 V 10 A Max.
Output 1: 20 V
Output 2: 5 V 2 A (USB port)
20 V Max. **
0.4 mm
0.62 lbs (280 g)
10 A Max.