Stihl HL 75 Manual De Instrucciones página 12

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

!
Warning!
To reduce the risk of fire, check fuel filler
cap for leaks at regular intervals. Use
the specified spark plug and make sure
it and the ignition lead are always in
good condition.
Keep spark plug and wire connection
tight and clean. The spark plug electrode
gap should be checked with a feeler
gauge at least every 50 operating hours
and reset if necessary. Fit a new spark
plug if the electrodes are badly pitted.
Keep cutting tool sharp. Tighten all nuts,
bolts and screws except the carburetor
adjustment screws after each use.
Always clean dust and dirt off the
machine after finishing work.
Do not use a grease solvent for
cleaning! In some countries an aerosol
can of resin solvent (protective spray),
Part No. 0782 420 1002, is available for
spraying the cutter blades.
HL 75, HL 75 K
This resin solvent protects the cutter
blades and has anticorrosive properties.
Spray the cutter blades before and after
work. Then start and run the hedge
cutter briefly so that the resin solvent is
evenly distributed over the blades. If the
hedge itself is very dusty and dirty, spray
the cutter blades more frequently. This
greatly reduces blade friction and the
damaging effects of sap and dust
particles.
!
Warning!
Do not operate your hedge cutter if the
muffler is damaged, missing or modified.
An improperly maintained muffler will
increase the risk of fire and hearing loss.
Never touch a hot muffler or burn will
result. If your muffler was equipped with
a spark-arresting screen to reduce the
risk of fire (e.g. in the USA, Canada and
Australia), never operate your hedge
cutter if the screen is missing or
damaged. Remember that the risk of
forest fires is greater in hot or dry
weather.
English / USA
Keep the engine and muffler free from
cuttings, chips, leaves, fibers and
excess lubricant.
For any maintenance please refer to the
maintenance chart and to the warranty
statement near the end of this manual.
Store hedge cutter in a dry and high or
locked location out of reach of children.
Before storing for longer than a few
days, always empty the fuel tank.
11

Publicidad

Capítulos

Tabla de contenido
loading

Este manual también es adecuado para:

Hl 75 k

Tabla de contenido