Instructions for Safe Operation
Check the device to make sure that there is no visible
damage that may affect user's safety and measurement
performance. It is recommended that the device should
be inspected minimally before each use. If there is
obvious damage, stop using the device.
Necessary service must be performed only by qualified
technicians. Users are not permitted to service this
device.
The oximeter must not be used with the devices and
accessories not specified in User Manual.
Cautions
Explosive hazard—DO NOT use the oximeter in
environment with inflammable gas such as some
ignitable anesthetic agents.
DO NOT use the oximeter while the Patient is under
MRI or CT scanning. This device is NOT MRI
Compatible.
Warnings
Discomfortable or pain may occur if using the sensor of
this device continuously on the same location for a long
time,
microcirculation. It is recommended that the Oximeter
should not be applied to the same location for longer than
2 hours or less if any abnormal condition is found.
Frequently check and re-position the Oximeter sensor.
User Manual for Pulse Oximeter
especially
for
the
patients
II
with
poor