Upload Data - CMi PC-66L Manual De Uso

Power saving: power saving setting; two options: "on"

and "off". The factory default setting is "on". When the
power saving mode is set to "on" option, during the
measurement, if there is no key operation for 2 minutes,
the screen display will be dim for power saving. The
display brightness will resume to normal condition by
pressing any key.
Volume: 3 levels setting: "1", "2" and "3",

corresponding to the speaker volume icons of "
and "
the volume of any sound generated by the device for
key press, over-limit alarm, pulse beep and audible
probe-off indication etc..

4.4.2 Upload Data

On the menu screen, select "UPLOAD DATA" and then press
" " key for entering into connecting status (as shown in Figure
4-5).
Note: Make sure the provided USB data cable is well connected
between the device and PC before uploading data.
When you transmit data (SpO
please let the oximeter stay in connecting status, then data
uploading will be activated. Refer to the instruction in "Oximeter
Data Manager User Manual"for detailed operation.
User Manual for Pulse Oximeter
respectively. The speaker volume icon indicates
"
and PR values) to your computer,
2
15
", " "