Sony BC-M150 Operación Manual página 41

3 DC OUT (DC power supply)
connector (XLR, 4-pins, male)
Supplies power to an external device
through an optional DC connecting
cable. Pin 4 is the plus connector and
pin 1 the minus.
Note
The BC-M150 cannot charge a battery
pack at the same time it supplies DC
power to an external device. If you
begin using the unit to supply power
to an external device while charging a
battery pack, the charging stops.
4 AC IN (AC power input)
connector
Used to connect the charger to an AC
outlet through the supplied AC power
cord.
5 Plug holder receptacle
The supplied plug holder secures the
supplied AC power cord so that it will
not come loose from the charger.
To remove the plug holder
receptacle
Plug holder
(supplied)
6 Display
The information of the battery packs
or the error message appears here.
7 DISPLAY button
Press repeatedly to display the battery
pack information such as capacity,
remaining charging time, a number of
cycles of charge and discharge.
8 REFRESH MANUAL/AUTO
selector
Select to refresh the nickel metal
hydride battery packs manually or
automatically.
9 REFRESH button
Used to refresh the nickel metal
hydride battery packs manually.
0 CHANNEL button
Used to select the battery pack to
display the information or to refresh.
11(EN)