Easy Home CRSF-16BI(M)4 Manual Del Usuario página 5

Pedestal Fan
5. Set the base upright and loosen the white cap on the top of the extension
pole. Pull the chrome inner pole up and tighten the white cap to secure the
chrome inner pole in place.
6. Pick up the motor housing and look at the bottom. There is a screw that may
need to be loosened to put the motor housing onto the extension pole.
7. Slip the motor housing onto the chrome end of the extension pole and tighten
screw on the motor housing to secure it in place.
8. Remove the white plastic nut located on the peg of the motor housing. Place
the back grill onto the over the peg onto the motor housing by making sure it
lines up with the pins. Replace and tighten the white plastic nut.
White plastic nut
9. Remove and discard the black plastic sheath on the shaft.
AFTER SALES SUPPORT
888-367-7373
Assembly
Pins for back
grill alignment
help@myproduct.care
5