gopart 60L Manual Del Usuario página 11

SPREADING INSTRUCTIONS
ADDITIONAL SPREADER SETTING INSTRUCTIONS
For materials that DO NOT use a typical 5,000 Sq. Ft, 10,000 Sq. Ft. & 15,000 Sq. Ft.
coverage value.
To obtain the proper spreader settings follow the steps below:
1) Find the total weight in lbs. of the product from the product label on the bag of
material.
2) Find the coverage amount in square feet that the product is rated for from the
product label on the bag of material.
3) Divide the bag weight rated in lbs. by the square feet coverage rated on the bag.
4) Take this result and multiply it by 1000.
5) This final number is the lbs. of material to be spread per 1000 square feet.
6) Use the spreader setting number in Chart B for the proper setting.
As an example:
1) The fertilizer bag weighs 10 lbs.
2) The coverage value is rated at 2000 square feet.
3) 10 lbs. / 2000 square ft. = 0.005
4) 0.005 × 1000 = 5 lbs. per 1000 sq. ft.
5) Using this number in Chart B, you would obtain a spreader setting of 17.
WARNING: Do not over apply spreading material. Follow the recommended coverage rate for each product. Over
application will lead to damage and contamination. If spreading material accidentally hits or deposits to heavily,
soak the area thoroughly with a garden hose or sprinkler to prevent burning.
UK
11