How It Works - Cooper Lighting FW Serie Instrucciones

FW42PC_PCW 825-0142.qxd:FW Series 325-1094 Spreads.qxd
Congratulations. You have purchased a Cooper Lighting, LLC Dusk to Dawn
security wall light. This fixture will provide years of convenience and protection
for your home or business.

How it works

Your Dusk to Dawn security light features a light sensor that automatically turns
the light on at dusk and off at dawn.
What you need
• Phillips head screwdriver
• Flat head screwdriver
• Weatherproof silicone caulk
What's included
• Fixture housing (A)
• Lens (B) (installed on fixture)
• Bulb (C) (inside fixture)
• Adjustable mounting bracket, knobs,
and screws (D)
• Lens screw (E) (installed in fixture)
• Wire connectors (F)
• Photo control cover (optional) (G)
• (2) #6 screws and (2) #8 screws (H)
What to know
• For outdoor use only.
• UL listed for wet locations.
• Fixture designed for wall mount to an outlet box only. Install fixture to outlet
box marked for use in wet locations.
• Fixture must be connected to a 120 Volt, 60 Hz power source. Any other
connection voids the warranty.
• Fixture should be installed by persons with experience in household wiring or
by a qualified electrician. The electrical system, and the method of electrically
connecting the fixture to it, must be in accordance with the National Electrical
Code and local building codes.
• This device complies with Part 18 of the FCC Rules. Any changes or modifi-
cations to the product described in this instruction sheet that are not expressly
approved by Cooper Lighting, LLC could void the user's authority to operate
the equipment.
Note: This equipment has been tested and found to comply with the limits
pursuant to part 18 of the FCC Rules. These limits are designed to provide
Call for customer service and/or missing or damaged parts (800-334-6871)
6/3/08
A
B
C
E
F
#6 Screws #8 Screws
G
2
4:34 PM Page 2
FW Series
D
H