CLEANING, CARE AND MAINTENANCE
Tip: To ensure a constant performance of the device, clean it after every usage thoroughly. You can rinse
the attachment under running water without any concerns. Do not immerse the device into water! Do not
clean it with chemicals! The device is maintenance-free, be careful with it!
1. The device has to be turned-off during cleaning.
2. Push the release button (C) on the side of the EasyPedipeel and remove the grinding head (B) easily.
3. Remove all remaining skin particles with the cleaning brush (I). You are able to clean dust and skin
particles from handle and attachment with it.
4. Often it is also advisable to clean the grinding head attachment additionally with soap and a nail
brush. You can then disinfect the attachment with disinfectant spray to prevent the transmission of
disease.
5. Dry the corneal sander and the individual parts with a cloth.
6. Attach the grinding head to the device. Make sure that the attachment is fully engaged. This is just
possible if installed properly! To do this, press the release button (C) while pushing the attach-
ment in and release it as soon as the attachment is firmly inserted.
7. Tip: Do not turn on the device if there is no attachment attached to it.
REPAIR INSTRUCTIONS
Attention! Electric devices are only fixed by qualified personnel. Improperly repairing can result in
severe consequential damage.
DISPOSAL
This product as well as any other electronic and electrical appliances, which have reached the end
of their lifetime, must be collected and disposed of separately from household waste material.