Set Up Camera On Reolink App (For Smartphone) - Reolink Argus 2 Manual Del Usuario

Set up Camera on Reolink App (For Smartphone)

Download and install the Reolink App on App Store (for iOS) and Google Play (for Android).
Get it on
Available on the
Please follow the prompt tones to configure the camera.
1. Please click the " " button
in the top right corner to add the
camera.
2. Scan the QR code on the back
of the camera.
3. Click "Connect to Wi-Fi" to
configure the wifi settings.
NOTICE:
• Reolink Argus 2/Argus Pro
camera only supports 2.4 GHz
Wi-Fi. 5 GHz is not supported.
• Your family can click "Access
Camera" for live view after the
initial setup.
4 English
4. A QR code will be generated on the phone. Please place the QR code on your phone towards
Reolink Argus 2 or Pro camera's lens at a distance of about 20cm (8 inches) to let the camera
scan the QR code. Please make sure that you've ripped the protection film of the camera's lens.
5. Follow the steps to finish the WiFi settings.
6. After you created a password for your camera, please follow the steps to sync the time, and
then start live view or go to "Device Settings"
20 cm ( 8 inches )
r
≈30cm(12 inch)
Menu
Add New Device
Enable/Disable PIR
Motion Sensor
(In default, the PIR sensor
is enabled.)
Device Settings
Access the Live View
Battery Status
English 5