Intended Use; Residual Risks; Information On Electromagnetic Compatibility - Femi PF 150 Manual De Uso

• INTENDED USE - The "Surface-thickness planer" has been designed to surface or thickness
plane hard wood.
UNINTENDED USE - IT is forbidden to:
• operate on metals, organic materials and/or food stuff s;
• operate on materials which may release toxic substances during the work process;
• use any type of lubricant during cutting.
This machine is not suitable for use in potentially explosive environments.

RESIDUAL RISKS

Shearing, cutting and severing hazard - Risk indicated by this symbol:
Precautions to be taken
• During the cutting phase do not wear work gloves.
• Keep hands away from the work area.
• Never remove cutting residues or workpiece fragments when the tool is rotating.
Friction or abrasion hazard - This risk is due to the presence of the moving blade.
Precautions to be taken
• When working with the tool do not wear work gloves.
• Keep hands away from the work area.
• Never remove cuttings or fragments from the machine when the blade is rotating.
Risk of fl ying debris - This risk is due to the presence of the moving tool.
Precautions to be taken
• When working with the tool, always wear the necessary personal protective equipment:
safety goggles, safety shoes, earmuff s.
• Keep your face away from the cutting area;
• Never bring hands anywhere near the cutting zone;
• To avoid breaking the blade, reduce pressure as soon as the blade comes into
contact with the workpiece;
• Lessen the cutting pressure to safeguard the machine.
INFORMATION CONCERNING NOISE - The noise values indicated are emission levels and
not necessarily safe operating levels. While there is a correlation between emission levels
and exposure levels, this cannot reliably be used to determine whether or not further safety
precautions are needed. Factors which infl uence the real level of a worker's exposure include
the duration of exposure, the characteristics of the working environment, other sources of
noise, for example the number of machines or operations being carried out in the near vicinity.
Furthermore, levels of safe exposure may be fi xed diff erently from one country to another. This
information does however help the machine user to better assess the hazards and risks.
It is advisable to use suitable hearing protection such as earmuff s or ear plugs.
INFORMATION ON ELECTROMAGNETIC COMPATIBILITY - Electromagnetic emissions
from the machine do not exceed the limits defi ned by the relative standards for the envisaged
conditions of use.
Check that the power supply system is equipped with a thermomegnetic circuit breaker
to protect all conductors from short circuit and overloads.
EN
USE
42