Nuna sena Manual Del Usuario página 9

How to set up the Travel Play Yard
Opening the Nuna Travel Play Yard
Check that you have all the parts for this product before
using it. The assembly must be performed only by adults.
1
- To uncover the Travel Play Yard frame (2), undo hook and
loop straps from the mattress and unfold. (3)
2
- Pull the short sides of the Travel Play Yard frame
outward. (4)
3
- Reach through bassinet and push down on bottom of
Travel Play Yard (5), push down the bottom center hub of
the travel play yard (6).
Set Up Bassinet
1
- Install mattress. (7)
2
- Install mattress, soft side up. The installed bassinet is
shown as (8)
Set Up Travel Play Yard
1
- Remove mattress from the bassinet.
2
- Remove the snaps (9) on the bassinet fabric from the
snaps at the center of each side the Travel Play Yard. (10)
3
- Release the buckles (11) on the four corners of the Travel
Play Yard (12). The clip attached to the long webbing
should loop out of the fabric loop on the Travel Play Yard
after being releasing.
4
- Take off bassinet (13).
5
- Place the mattress on the bottom of the Travel Play Yard
(14) by feeling the straps on the corners through the
holes.
9 SENA Instructions
6
- Pull strap through bottom of playard and wrap around
tube and refasten snap. Repeat on other corners. (15, 16)
7
- Push down on all four corners of the mattress to assure
the mattress is fastened.
How to fold Travel Play Yard
Folding the Travel Play Yard
1
- Release the snaps. (15, 16)
2
- Remove mattress from the Travel Play Yard.
3
- Grab silver strap on bottom of Travel Play Yard and pull
up. (17)
4
- Pull sides together towards the center. (18) Do not force.
How to store Travel Play Yard
Storing the travel crib
1
- To store the Travel Play Yard frame, fold the frame. (15,
16, 17, 18)
2
- Wrap the unit with the mattress, guide the hook and loop
fasteners straps through the rings and attach them. (19,
20)
3
- Pull drawstring together.
SENA Instructions 10