ResMed AirMini Guia Del Usuario página 4

Operating altitude
Storage and transport
temperature
Storage and transport
humidity
Design life
Electromagnetic compatibility Product complies with all applicable electromagnetic compatibility
Symbols which may appear on the machine
Warning or caution, consult accompanying documents (IEC 60601-1);
Class II equipment (IEC 60601-1);
of fingers and against vertically dripping water (IEC 60601-1-11);
Protection against insertion of fingers and will not become unsafe
IP22
when it is exposed to vertically dripping water with the device tilted up to
15 degrees (IEC 60601-1-11);
(IEC 60417-5016);
Authorized Representative (ISO 15223-1);
number (ISO 15223-1);
limitation (ISO 15223-1);
Operating altitude (ISO 15223-1);
limitation (ISO 15223-1);
See symbols glossary at ResMed.com/symbols.
Environmental Information (EU directive 2012/19/EE Waste
Electrical and Electronic Equipment (WEEE))
The DC/DC converter should be disposed of separately, not as unsorted
municipal waste. To dispose of your device, you should use appropriate
4
Sea level to 8,500' (2,591 m); air pressure range 1013 hPa
(1013 cmH O) to 738 hPa (738 cmH
2
-13°F to +158°F (-25°C to +70°C)
5 to 95% RH non-condensing
5 years
requirements (EMC) according to IEC60601-1-2, for residential,
commercial and light industry environments.
Portable RF Communications equipment (including peripherals
such as antenna cables and external antenna) should be no
closer than 10 cm to any part of the AirMini system. Otherwise
degradation of the performance of this equipment could result.
Information regarding the electromagnetic emissions
and immunity of this ResMed device can be found on
www.resmed.com, on the Products page under Service and
Support.
Direct Current (IEC 60601-1);
Manufacturer (ISO 15223-1);
China pollution control;
Temperature limitation (ISO 15223-1);
Importer.
O)
2
Protection against insertion
IP21
European RoHS;
Atmospheric pressure
Medical device.
Fuse
European
Serial
Humidity