Blackmagic Design Studio Camera 4K Plus Manual De Instalación Y Funcionamiento página 804

Group ID Parameter
2.1 Headphone level
2.2 Headphone program mix
2.3 Speaker level
2.4 Input type
Audio
2.5 Input levels
2.6 Phantom power
3.0 Overlay enables
Frame guides style (Camera
3.1
3.x)
Frame guides opacity
3.2
(Camera 3.x)
Output
Overlays
(replaces .1 and .2
3.3
above from
Cameras 4.0)
4.0 Brightness
4.1 Exposure and focus tools
4.2 Zebra level
4.3 Peaking level
4.4 Color bar enable
Display
4.5 Focus Assist
4.6 Program return feed enable
Type Index
fixed16 –
fixed16 –
fixed16 –
int8 –
[0] ch0
fixed16
[1] ch1
boolean –
uint16
–
bit field
int8 –
fixed16 –
[0] = frame guides
style
[1] = frame guide
opacity
int8
[2] = safe area
percentage
[3] = grid style
fixed16 –
0x1 = zebra,
int16
0x2 = focus assist,
bit field
0x4 = false color
fixed16 –
fixed16 –
int8 –
[0] = focus assist
method
int8
[1] = focus line color
int8 –
Minimum Maximum
0.1 1.0
0.1 1.0
0.1 1.0
0 3
0.0 1.0
0.0 1.0
– –
– –
0 8
0.1 1.0
– –
0 100
0 100
– –
0.0 1.0
– –
0.0 1.0
0.0 1.0
0 30
– –
– –
0 30
Developer Information
Interpretation
0.0 = minimum, 1.0 = maximum
0.0 = minimum, 1.0 = maximum
0.0 = minimum, 1.0 = maximum
0 = internal mic,
1 = line level input,
2 = low mic level input,
3 = high mic level input
0.0 = minimum, 1.0 = maximum
0.0 = minimum, 1.0 = maximum
true = powered,
false = not powered
bit flags:
[0] = display status,
[1] = display frame guides
Some cameras don't allow
separate control of frame
guides and status overlays.
0 = HDTV, 1 = 4:3, 2 = 2.4:1,
3 = 2.39:1, 4 = 2.35:1,
5 = 1.85:1, 6 = thirds
0.0 = transparent, 1.0 = opaque
0 = off, 1 = 2.4:1, 2 = 2.39:1,
3 = 2.35:1, 4 = 1.85:1, 5 = 16:9,
6 = 14:9, 7 = 4:3, 8 = 2:1,
9 = 4:5, 10 = 1:1
0 = transparent, 100 = opaque
percentage of full frame
used by safe area guide
(0 means off)
bit flags:
[0] = display thirds,
[1] = display cross hairs,
[2] = display center dot,
[3] = display horizon
0.0 = minimum, 1.0 = maximum
0 = disable, 1 = enable
0.0 = minimum, 1.0 = maximum
0.0 = minimum, 1.0 = maximum
0 = disable bars,
1-30 = enable bars with timeout
(seconds)
0 = Peak,
1 = Colored lines
0 = Red,
1 = Green,
2 = Blue,
3 = White,
4 = Black
0 = disable, 1-30 = enable with
timeout (seconds)
804