Disposal Requirements - Panasonic S-20UM3HPQ Manual De Instalación Y Funcionamiento

2. Remove the air filters.
Pull the air filter clips toward you, and detach the filter.
3. Clean the air filter.
Use a vacuum cleaner or wash the air filter with water.
When the air filter is very dirty, use a soft brush and neutral
detergent.
Remove water and dry in the shade.
4. Fix the air filter.
Attach the air filter to the suction grill by hanging it to the
projected portion above the suction grill.
Press the bottom of the air filter against the projections on the
bottom of the grille to snap the air filter into its place.
5. Shut the air inlet grill.
Refer to item No. 1.
6. After turning power on, press the FILTER SIGN RESET button.
The "TIME TO CLEAN AIR FILTER" display disappears.
(For details, refer to the operation manual of the outdoor unit.)
NOTE Do not remove the air filter except when cleaning.
Unnecessary handling may damage the filter.
How to clean the air outlet and outside panels
Clean with a soft cloth.
When it is difficult to remove stains, use water or neutral
detergent.
When the blade is extremely contaminated, remove it as below
and clean or exchange it. (Blade for exchange is optional.)
Do not use gasoline, benzene, thinner, polishing
NOTE
powder nor liquid insecticide. It may cause
discolouring or warping.
Do not let the indoor unit get wet. It may cause
electric shock or fire.
Installation and operation manual
8
How to clean the suction grill
1. Open the suction grill.
Push both knobs simultaneously and carefully lower the grille.
(Identical procedure for closing.)
2. Detach the suction grill
Open the suction grill 45 degrees and lift it upward.
3. Clean the suction grill
Wash it with a soft brush and neutral detergent, and dry thoroughly.
NOTE When the suction grill is very dirty, use a typical kitchen
cleaner and let it sit for about 10 minutes. Than, wash it
with water.
4. Reattach the suction grill
See item n° 2.
5. Close the suction grill
See item n° 1.

Disposal requirements

Dismantling of the unit, treatment of the refrigerant, of oil and of other
parts must be done in accordance with relevant local and national
legislation.
Your air conditioning product is marked with this symbol.
This means that electrical and electronic products shall
not be mixed with unsorted household waste.
Do not try to dismantle the system yourself: the dismantling of the air
conditioning system, treatment of the refrigerant, of oil and of other
parts must be done by a qualified installer in accordance with
relevant local and national legislation.
Air conditioners must be treated at a specialized treatment facility for
re-use, recycling and recovery. By ensuring this product is disposed
of correctly, you will help to prevent potential negative consequences
for the environment and human health. Please contact the installer or
local authority for more information.
Batteries must be removed from the remote controller and disposed
of separately in accordance with relevant local and national
legislation.
S-20~125UM3HPQ
Urban Multi air conditioner
4PW15113-1B