Handling And Transportation - Beko VCO 42701 AB Manual Del Usuario

4 Cleaning and care
4.2.2 HEPA filter and outlet filter
HEPA outlet filter is located on the rear side of the
appliance.
1. Remove the HEPA filter by pulling it from its
handle.
2. Shake off the HEPA outlet filter to eliminate
the dusts on it. After that, you can wash it by
holding its clean side under running cool water.
3. If you wash the HEPA filter, dry it at room
temperature (for 24 hours minimum). Do not
use it before ensuring that it is completely dry.
4. Remove the outlet filter that is found at the
back of the cover.
5. After washing the outlet filter under running
water, wring it out slightly and let it dry (for 24
hours minimum).
Vacuum Cleaner / User Manual
4.3 Storage
• If you do not intend to use the appliance for a
long time, store it carefully.
• Unplug the appliance.
• Keep the appliance out of the reach of children.
4.4 Handling and
transportation
• During handling and transportation, carry
the appliance in its original packaging. The
packaging of the appliance protects it against
physical damages.
• Do not place heavy loads on the appliance or on
the packaging. The appliance may get damaged.
• Dropping the appliance may render it non-
operational or cause permanent damage.
11 / EN