Flotec FBP3-A Manual Del Usuario página 5

Installation
Purging the air in the pump
1. Place the pump selector button in the
AUTO position.
2. Open a faucet
3. Using the provided multitool or a flat
screwdriver, slowly loosen the purge screw
until you have ensured that the pump is free
of air.
4. Tighten the purge screw.
5. Close the faucet.
NOTICE This procedure will be carried out only
the first time the pump is started.
For parts or assistance, call Flotec Customer Service at 1-262-728-5551
5
6465 1011