Technoline WS6447 Manual De Instrucciones página 16

Problem
LCD is blank
No outdoor
temperature and
humidity is
displayed
Temperature
and humidity
are incorrect
Hereby, Technotrade declares that this product WS 6447 is in compliance with the essential
requirements and other relevant provisions of Directive 2014/53/EU and ROHS 2011/65/EC. The
original EU declaration of conformity may be found at: www.technoline.de/doc/4029665064475
SPECIFICATIONS:
Temperature Range
Indoor +32°F to +122°F (0°C to +50°C) (display shows HH.H / LL.L if out of this range)
Outdoor -13°F to +158°F (-25°C to +70°C) (display shows HH.H / LL.L if out of this range)
Humidity Range
Indoor
Outdoor
Temperature Resolution
RH% Resolution
Transmission frequency:
Maximum transmission power:
Time format
Time
Alarm 1 and 2
Alarm Duration
Snooze Duration
Solution

Replace fresh batteries in your weather station.

Make sure the AC/DC adaptor is plugged into an working AC
outlet properly.

Make sure the DC jack is plugged in to the weather station
properly.

Press and hold  /
outdoor temperature signal again.

Press and hold  /
reinstall with new ones to your outdoor transmitter.

Make sure the correct channel is selected on your weather
station (default setting is

Observe if the Low Battery icon appears on the right of the
outdoor temperature. If yes, replace batteries in outdoor
transmitter with new alkaline batteries.

No other interfering sources are being used (such as computer
monitors, TV sets, headphones, or speakers) in the path of
signal from the outdoor sensor. The signal travels in a straight
line, an electrical source near that "line" may cause interference.

Make sure your main unit and the outdoor transmitter is away
from sources of heat / cold / direct sunlight / rain.
20% - 95%
20% - 95%
0.2°F / 0.1°C
1%
433 MHz
6 dBm
24 hrs
0:00
6:00 am
2 minutes
5 minutes
on the weather station to search for
, then take out the batteries and
– Channel 1)
EN 7