How To Use - George Foreman GRP101CTG Manual De Instrucciones

Ocultar thumbs Ver también para GRP101CTG:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Product may vary slightly from what is illustrated
1. Preheat indicator light
2. Grill plate release handles (both sides)
3. Grill plate (lower) (not shown)
4. Grill plate (upper) (not shown)
5. On/Off switch (not shown)
† 6. Drip tray (Part # 1225K-01-B) (not shown)
† 7 Spatula (Part # 19264-01) (not shown)
† 8. Griddle plate (Part # 1322H9-02-P-1) (not shown)
Note: † indicates consumer replaceable/removable parts
4

How to Use

This product is for household use only.
GETTING STARTED
• Remove all packing material and, if applicable, any stickers from the product; remove and
save literature.
1
• Please go to www.prodprotect.com/applica to register your warranty; for additional
information go to www.georgeforemancooking.com.
• Wash all removable parts and/or accessories as instructed in CARE AND CLEANING.
• Select a dry, level location where your grill will be used, leaving enough space between the
back of grill and wall to allow heat to flow without damage to cabinets and walls.
ATTACHING THE GRILL PLATES
Important: This appliance must always be used with two plates securely attached.
1. Securely attach top and bottom grill plates using the release handles on each side of the
plates.
2
2. To secure the plate, press in on both release handles, set the plate on the grill, then release
the handles.
Tip: If there is no space between top and bottom release handles when grill is closed, the plates
are properly attached.
DRIP TRAY
Place drip tray under front sloped section of grill.
PREHEATING THE GRILL
1. Close cover on grill.
2. Unwind cord and plug into standard electrical outlet.
3. The preheat indicator light comes on to indicate that the elements are heating.
4. Allow grill to preheat (approximately 5 minutes) before grilling. When tdesired temperature
is reached, the preheat indicator light will go off.
Note: The preheat indicator light will cycle on and off during cooking to indicate your desired
temperature is being maintained.
GRILLING
1. Using a pot holder, carefully open the preheated grill.
2. Before first use, lightly oil grill plates, if desired.
Note: Aerosol cooking spray should not be used on nonstick surface. Chemicals that allow spray
to come out might build up on surface of grill plates and reduce their efficiency.
3. Carefully place foods to be cooked on lower grill plate. Close cover.
4. Use suggested cooking times found in the GRILLING CHART on pages 6 and 7. If desired, use
a kitchen timer.
Important: Do not leave the appliance unattended during use.
5. After selected time, the food should be done.
6. Using a pot holder, carefully open the grill cover.
7. Remove cooked food using plastic spatula provided.
Note: Always use heatproof plastic, silicone or wood utensils to avoid scratching nonstick
surface of grill plates. Never use metal skewers, tongs, forks or knives.
Caution: Wait for appliance to cool, before attaching grill plates.
5

Publicidad

Tabla de contenido
loading

Tabla de contenido