Agilent Technologies TMP Profibus Gateway Manual De Instrucciones página 165

Table 7
Offset Unit/res. Size (byte)
0 1
1 2
3 2
In order to don't overload the controller's RS-485 serial link, following
NOTE
precautions are taken:
•
•
TMP Profibus Gateway User Manual / 87-900-976-01 (F)
Output Buffer Structure (all families) 5 bytes for each controller
Range Description
B7 Start/Stop (0 = stop 1 = start)
B6 Low speed (0 = no
B
5
B
4
B
3
B
2
B
1
B
0
High speed adjust
Low speed adjust
The parameters are written from the gateway to the controller only when
their value changes.
The parameters are never read back from the controller to the interface.
The controller's response at the write command (ACK, NACK, etc) is
used to establish if the writing succeed or not.
Technical Information
1 = yes)
Soft start (0 = no 1 = yes)
---
Heater jacket enable (ICE only, 0 = no 1 = yes)
Vent valve on/off (Nav only, 0 = Off 1 = On)
Internal fan on/off
External fan on/off
Message Mapping
165/178
18