auna NR-620 Manual Del Usuario página 37

(2) Recording a complete CD
• Insert a CD with the printed side up & close the CD compartment.
• After inserting the CD, press „Record" (9) - Note: Do not press „Play/
Pause/Stop" (19) and then „record", otherwise only the track currently
playing will be recorded.
• & appear and flash on the LCD display (2) during recording.
• After recording, playback stops automatically.
(3) Recording a playback program
• Insert a CD with the printed side facing up & close the CD compartment.
• Select desired track as described in „CD/MP3 Programming". Then
press „Play/Pause/Stop" (19) to start playback.
• Now press „Record" (9) and
display (2) during recording.
• After recording, playback stops automatically.
Notes
• You must insert a storage medium (USB or SD/MMC card) to record
files.
• The recording speed is 1:1 and is therefore equal to the playback time of
the tracks
• During the copy mode only MP3 files are copied
• The system creates an „audio" folder for recording and „fcopy" for the
copied files
• The recording format is preset - MP3 bitrate: 128 kbps,
sampling rate : 44.1 kh
• During encoding no recording can be done
• To interrupt the recording, press „Record" again during recording
• If USB and memory card are connected to the device, recording will be
done to USB first
• Encoding or copying is not completed successfully until the complete
title has been encoded or copied. If the process is cancelled before, no
file will be created on the memory.
& appear and flash on the LCD
EN
37