Master audio PRO SERIE Manual De Usuario página 23

Amate Electroacústica,s.l.
KR-208A optional kit must be used to fly a complete PA-208A system. This hardware
is manufactured from steel with black paint finish; they are affixed to the box with
special crop resistant screws. Fore more information read "KR-208A" user manual (at
www.master-audio.com)
Fig.7. KR-208A flying kit
The front guides are used to vertically join the cabinets; the back guides are used to
vertically join the cabinets and to tilt them.
Angles can be changed from 0º to 11º. To safely lock both guides, the lock pins
supplied must be used.
Fig.8. Flying hardware
Available tilt angles are 0º, 1º, 2º, 3º, 5º, 8º and 11º.
Fig.9. Back guide
PA208A.Ver 1.0 May 09
23