Connections With An Amplifier - Pioneer PD-70AE Manual De Instrucciones

> Before Start > Part Names

Connections with an amplifier

Install
1
a
2
a
a Analog Audio Cable
8
> Install > Playback
This unit
Play the audio from discs played on this unit and from
devices connected to this unit through speaker systems
connected to integrated amplifiers or AV receivers. Connect
to suit the input jacks on your amplifier.
1
a
2
Integrated amplifier, AV receiver, etc.
Connecting with an analog audio cable
The signal is converted to analog in the D/A converter of
this unit and then output to an integrated amplifier, for
example. Connect the LINE IN jacks on an integrated
amplifier to the ANALOG OUT jack (RCA jack) on this unit.
0 Make sure the RCA ANALOG OUT switch is ON.
Advanced Setup | Others