Leviton HDX Fiber Optic Manual De Instalación Y Funcionamiento página 11

3 INTRODUCTION TO SYSTEM HARDWARE
3.2 Leviton HDF3168 MDA Frame Connectivity Components
The Leviton HDF3168 MDA Frame Connectivity components are designed for high density
patching and scalability capable of migration to 40/100Gb applications. The HDF3168 Frame
Components are:
Patch Deck #F3168-DCK: The Patch Deck is a housing capable of supporting 6 Patch
Deck trays. Decks are mounted using provided #12/24 screws in industry standard rack unit
threaded holes.
HDF 3168 Patch Deck
The Patch Deck mounts on the Frame as shown in Figure 4.
Each Patch Deck is provided with the following components:
Quantity Description
1 Patch Deck
6 Patch Deck Trays
1 Front Cable Management Louver
1 Rear Routing Guide assembly
1 Cable Clamp base and clamp
1 Accessory Kit
1 Instruction Sheet
Patch Tray: The Patch Tray accepts either HDX MTP
available in SC, LC or MTP
OS2 grades.
NOTE: MTP ® Cassettes and Adapter Plates are interchangeable within Trays and Decks.
® front side connector configurations in OM2, OM3/4 and
MDA Patching Deck Tray
11
Figure 4
cassettes or adapter plates. Both are
®