5 HARDWARE INSTALLATION
5.7 Installing Splicing Trays to a Splice Deck Tray
Install a Leviton Splicing Tray by following these steps:
5.7.1 Remove the label window from each Splice Deck Tray.
5.7.2 Slide each tray rearward until the tray surface is accessible for mounting.
5.7.3 Place the splice tray over the guide post.
5.7.4 If a second splicing tray is needed, remove the cover from the bottom splicing tray and
stack the second tray above the first.
5.7.5 Install the Velcro by inserting the loops over each arrow lance point and secure the
splicing tray stack to the splice deck tray (Figure 17).
5.8 Installing Label Cards and creating custom labels
Each Patch Deck and Splice Deck is provided with label strips for installation in each tray. Label
strips are inserted into the magnification holder from the top. Laser printed labels can be created
with Rhino 6000 and 6500 series or other professional labeling tools. Recommended label tape
size is 3/8 in..
Figure 17
25