Leviton HDX Fiber Optic Manual De Instalación Y Funcionamiento página 19

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

5 HARDWARE INSTALLATION
5.1.4.3 Install desired tile edging, grommet material or other trim/air
damming device.
• If using adjustable tile edging with edge overlap of 0.75 in. or less, place
• If using adjustable tile edging, grommet or air blocking devices with edge
NOTE:
In a Raised Access Floor environment, the HDF3168 MDA Frame is
designed to be placed directly over one 2 ft x 2 ft floor tile. If this is not achievable
due to spatial or existing conditions, ensure that a minimum of one removable tile is
available for under floor access within reach of the Frame.
the frame over the exposed tile cut and mount the frame first. Edging can
be placed in the opening after the frame is mounted.
overlap of greater than 0.75 in., install all devices in the tile opening prior
to mounting the frame. Apply spacers, such as 5/8 in. flat washers at each
threaded rod location as needed to elevate the frame above the tile cut
and selected device.
19

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

F3168-22f

Tabla de contenido