Publicidad
EN
A - Car seat release button with indicator for
correct installation
B - Support leg indicator for correct installation
(L+R)
C - Support leg
D - Adjuster button for support leg
E - Storage compartment for user manual
F - ISOFIX release buttons with indicator for
correct installation (L+R)
G - ISOFIX connectors (L+R)
H - Lever for ISOFIX connector length
adjustment
I - Anchor points for securing seat
SAFETY
The car seat base is developed for an intensive
use of approximately 6 years.
Tinca base car use
• Unfold the support leg (C) and place the base
on the vehicle seat. Pull the ISOFIX connectors
(G) outwards by simultaneously pulling the lever
for ISOFIX connector length adjustment (H).
• Connect the ISOFIX connectors (G) with
the ISOFIX anchorage points in the back of
the vehicle seat. An audible 'CLICK' confirms
the connection is secure. Now push the base
towards the backrest of the vehicle seat as far
as possible.
• Place the support leg (C) in the most forward
position. Press the support leg adjuster button
(D) and adjust to the correct length by pulling the
lower part of the support leg down. Make sure
the support leg is stable and firmly positioned
on the vehicle floor. The indicator (B) on the
I
I
24
Tinca base
Bébé Confort
side of the support leg turns green when the
installation is secure.
WARNING:
Install the car seat base only on a forward facing
vehicle seat.
Installing Tinca car seat
• Connect the mounting bars onto the base until
they lock onto the base by means of an audible
'CLICK'. Make sure the indicator located on the
car seat release button (A) has turned green.
• To release Tinca from the Tinca base, first
press the car seat release button (A) and then
pull it towards the front of the base. Remove
Tinca from the base.
WARNING:
• Never install Tinca in forward facing position
onto the Tinca base in the car.
• Do not install the Tinca base with Tinca on it in
the area of airbag deployment.
• The safety of your child for not complying with
the installation and instruction manual is not
guaranteed.
CARE
The base can be cleaned using a wet cloth.
Publicidad
