Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
QUICK START GUIDE
1.
Assemble the contents of your kit.
2.
A 15-minute resting period is recommended to stabilize the body prior to
taking a reading.
3.
Have the assistant find your brachial artery, which is at the inner aspect
of your elbow.
4.
Remove any constrictive clothing or jewelry that may interfere with the cuff
placement. Have the cuff wrapped snugly around your left arm with the cuff's
bottom edge approximately 0.5" (1.3 cm).
5.
Rest your elbow on a table making sure the cuff is at the same level as your heart.
6.
Position the stethoscope's chest piece over the brachial artery.
7.
Position the gauge in hand or in a stable, readable location.
8.
Have your assistant slowly and steadily inflate the cuff
30 mmHg above your last known SYSTOLIC reading. If not known, inflate
between 180 - 200 mmHg.
9.
At a rate of 2 - 3 mmHg per second, begin to deflate the cuff.
10. The first "thumping" sound heard is your SYSTOLIC rate.
11. The last sound heard is your DIASTOLIC rate.
12. Record your measurements.
13. A 15-minute rest period is needed between readings to allow the blood
vessels to return to normal.
CAUTION: Never inflate the cuff above 280 mmHg.
Specifications are subject to change without notice.
Manufactured for:
HealthSmart
1931 Norman Drive
Waukegan, IL 60085
Register this product at LiveHealthSmart.com
Satisfaction
#91-04-176 02/15
Guaranteed
© 2015 HealthSmart
12
®
International
®
International
Publicidad
Tabla de contenido
