Power And Continuous Monitoring - Dyson Pure Hot + Cool Cryptomic Manual De Instrucciones

Place the remote control on top
of the machine with the buttons
facing down.
Plug in and switch on.
Remote
control
Standby
on/off
Tilt control

Power and continuous monitoring

Standby on/off
Press the Standby on/off button on
your Dyson purifying fan heater
or remote control to stop your
machine. It will continue to monitor
the air quality.
Continuous monitoring
With continuous monitoring turned
on, your Dyson purifying fan heater
will gather air quality, temperature
and humidity information, which is
displayed on the LCD screen and in
the Dyson Link app.
Continuous monitoring is turned
off by default. Once turned on, it
will always be active until you turn it
off again.
Continuous monitoring on/off
Press and hold the Auto mode
button on the remote control for
5 seconds to turn it on. The LCD
screen will indicate when continuous
monitoring is on or off.
Wi-Fi Connectivity
Wi-Fi is on by default. To turn the
Wi-Fi on or off, press and hold
the Standby on/off button on your
machine for 5 seconds.