Cebora 449.00 Manual Instrucciones página 13

1.5.6 Logic funcionality Varc (WIN TIG)
The Kit art. 449.00, installed inside the Power Source, allows the power source output voltage reading,
devoid of the high voltage / high frequency (HF) pulses required for the arc striking.
This signal can be used by the installer as a feedback volt- age for the CNC or PLC.
Obviously, as a function of the input parameters of the used digital controller, the signal will have to be
appropriately attenuated (by the installer).
1.5.7 Elettric diagram
3301060/A
13
ES
16/11/2020