Steren MUL-450 Manual Del Usuario página 23

INSTRUCTIONS
MEASURING DC / AC voltage
1.- Connect the red testing point to the jack signaled "V/ohms"
and the black testing point to the jack signaled "COM".
2.- Set the dial to the V - - - (VCD) / V~ (VCA) setting
Antes de utilizar su nuevo Kit C
When the value to be measured is unknown, set the dial to
the maximum setting. Reduce level by level until reaching
the desired one.
3.- Connect the testing points to the equipment to be measured.
4.- Turn the equipment to be measured on, the voltage will
appear in the LCD display. The polarity will also appear.
If you want to hold the value, press HOLD button.
V - - - V~
ENGLISH-07