Steren MUL-450 Manual Del Usuario página 24

MEASURING DC/AC CURRENT
1.- When measuring up to 200 mA connect the red testing point
to the jack signaled "mA", when measuring up to 20A connect the
red testing point to the jack signaled "mA", in both cases insert
the black testing point to the jack signaled "COM".
2.- Set the dial to A - - - scale if you measure DC or A~ scale if
you measure AC
Antes de utilizar su nuevo Kit C
When the value to be measured is unknown, set the dial to
the maximum setting. Reduce level by level until reaching
the desired level.
3.- Open the circuit and connect the testing points (in serial) to
the equipment to be measured.
4.- Read the value in the LCD display.
If you want to hold the value, press HOLD button.
MEASURING DC
ENGLISH-08