Safety Precautions - Denso first time fit Instrucciones

SAFETY PRECAUTIONS

DWARNING: DENSO compressors are sealed, pressurized and contain factory-specified
amounts of refrigerant oil used in the original design of the unit.
• Always wear safety goggles.
• Avoid skin contact with refrigerant or refrigerant oil.
• Work in a well-ventilated area.
• Never release refrigerant into the atmosphere.
• Never expose refrigerant container to direct heat or temperature in excess of 125˚F.
• Never expose refrigerant to an open flame.
Compressor Removal Procedures
NOTE: For more detailed instructions please refer to the vehicle manufacturer's service manual.
1. Identify the type of refrigerant before working on the vehicle.
2. Using a certified refrigerant recovery machine, reclaim the refrigerant in accordance with
any federal, state or local regulations from the A/C system.
3. Disconnect the negative (ground) cable from the battery.
4. Disconnect the A/C compressor lead wire from the vehicle harness.
5. Disconnect the hoses or hose assembly from the compressor and quickly cap the hose to
reduce the amount of moisture entering the A/C system.
6. Loosen and remove the compressor drive belt.
7. Loosen and remove the compressor mounting bolts.
8. Remove the compressor.
2